4.2.11. Replacement of valvate springs with plates and maslootrazhatelny caps
Replacement of the broken valvate springs and defective maslootrazhatelny caps of cores of valves on the VTEC models demands preliminary dismantle of a head of cylinders. Remove camshafts and a head of cylinders, then address Part materials the General and capital repairs of the engine of the present Chapter and, working according to the instructions provided in appropriate section, remove valves, valvate springs and maslootrazhatelny caps.On the models which are not equipped with the VTEC system, replacement of the considered components is made without dismantle of a head. The description of the procedure is provided to the VTEC Systems - the general information and check of a condition of components of the Part Repair of the engine without extraction from the car - the Civic model of the present Chapter.