11.1. Specifications
General parameters
|
Characteristic |
Value |
|
Pedal of a foot brake |
|
|
Free wheeling, mm |
|
|
Civic |
1.6÷4.8 |
|
Integra |
1.6÷5.2 |
|
Height, mm |
|
|
Models with RKPP |
|
|
Civic |
153.2 |
|
Integra |
160.3 |
|
Models with AT/CVT |
|
|
Civic |
160.3 |
|
Integra |
165.1 |
|
Course of the lever of the parking brake |
See the Head Routine maintenance |
|
Gap between a pusher of the vacuum amplifier and the GTTs piston (with a depth of depression of 508 mm of mercury. on the amplifier), mm |
0.0÷0.5 |
Disk brake mechanisms
|
Characteristic |
Value |
|
Minimum admissible thickness of brake shoes |
See the Head Routine maintenance |
|
Minimum admissible thickness of a disk |
See marking on a disk |
|
Maximum admissible size of differences of thickness of a disk (overlapping), mm |
0.015 |
|
Maximum admissible beating of a disk, mm |
0.102 |
Drum brake mechanisms
|
Characteristic |
Value |
|
Minimum admissible thickness of frictional overlays of brake boots |
See the Head Routine maintenance |
|
Maximum admissible internal diameter of a drum |
See marking on a drum |
Efforts of tightening of threaded connections, Nanometer
|
Connection type |
Value |
|
Hollow bolt of nipple knot of connection of a brake hose to a support of the brake mechanism (forward and back) |
34 |
|
Bolts of a forward support |
|
|
Civic (see identification marking on the support case) |
|
|
Support of type 5410 |
33 |
|
Support of type 2056 |
34 |
|
Top bolt |
34 |
|
Lower bolt |
27 |
|
Integra |
|
|
Issue models from 1994 to 1997 |
31 |
|
Issue models since 1998. |
33 |
|
Bolts of fastening of an anchor bracket of a forward support |
108 |
|
Bolts of a back support |
56 |
|
Nuts of fastening of wheel cylinders |
9.5 |
|
Nuts of fastening of the vacuum amplifier of brakes |
12.2 |
|
Nuts of fastening of GTTs |
14.9 |