|
1. The module of management of ECM/PCM is in interior of the car under the dashboard, behind the top overlay of a threshold of a forward passenger door.
|
|
Remember that static electricity is capable to damage to give to a processor exit out of operation. Before touching assembly, ground yourself on the mass of a body, use special antistatic laying for storage of the module. |
2. Disconnect SRS (see the Head Onboard electric equipment).
|
|
If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for introduction of the equipment to action! |
3. Turn off a carpet, having bared assembly of the lower panel and a part of a floor under the dashboard on the right (see the Head Kuzov).
4. Remove the panel of the top overlay of a threshold of a passenger door, having provided thereby access to the ECM/PCM module.
|
|
5. Give nuts of fastening of the module of management to the arm (see an accompanying illustration). |
6. Disunite the ECM/PCM electric sockets.
|
|
In order to avoid damage of the processor ignition at shutdown/connection of an electrical wiring has to be switched off (a key in position of OFF). |
7. Carefully remove ECM/PCM.
8. Installation is made upside-down.
|