6.1. Specifications
General parameters
| Characteristic | Value | 
| Fuel pressure (at single turns of the engine), kgf/cm2 | 
 | 
| Civic | 
 | 
| With the connected vacuum hose of the regulator | 2.0÷2.5 | 
| With the disconnected vacuum hose of the regulator | 2.7÷3.2 | 
| Integra | 
 | 
| B18B1 engine | 
 | 
| With the connected vacuum hose of the regulator | 2.2÷2.5 | 
| With the disconnected vacuum hose of the regulator | 2.8÷3.3 | 
| The B18C1 engine for 1997 the issue. | 
 | 
| With the connected vacuum hose of the regulator | 2.7÷3.2 | 
| With the disconnected vacuum hose of the regulator | 3.4÷3.9 | 
| B18C1 engine | 
 | 
| With the connected vacuum hose of the regulator | 2.7÷3.2 | 
| With the disconnected vacuum hose of the regulator | 3.3÷3.8 | 
| Resistance of an injector of injection of fuel, Ohm | 
 | 
| Civic | It is not stipulated (but should not be zero or infinite) | 
| Integra | 
 | 
| 1994 and 1995 | 10÷13 | 
| since 1996 | It is not stipulated (but should not be zero or infinite) | 
| Resistance of the fuel level sensor, Ohm | 
 | 
| Civic (the sensor is fixed by a nut) | 
 | 
| Full tank | 3.5÷5.0 | 
| Half the filled tank | 25.5÷39.5 | 
| Empty tank | 105÷108 | 
| Civic (the sensor is fixed by a lock ring) | 
 | 
| Full tank | 2.0÷5.0 | 
| Half the filled tank | 25.5÷39.5 | 
| Empty tank | 105÷110 | 
| Integra | 
 | 
| Full tank | 2.0÷5.0 | 
| Half the filled tank | 29.5÷35.5 | 
| Empty tank | 105÷110 | 
Efforts of tightening of threaded connections, Nanometer
| Characteristic | Value | 
| Service bolt of an injector of injection | 
 | 
| Bolt on 6 mm | 
 | 
| Civic 1996 | 11.8 | 
| Integra from 1994 to 1996 | 14.9 | 
| Hollow bolt on 12 mm (all models) | 34 | 
| Bolts/nut of fastening of the case of a throttle | |
| Integra 1994 and 1995 | 19.0 | 
| All other models | 22 | 
| Nuts of fastening of the fuel highway | 12.2 |