6.5. Removal and installation of the fuel pump

See preventions at the beginning Dropping pressure in a power supply system.


 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!


2. Dump pressure in a power supply system (see Dropping pressure in a power supply system).
3. On all models, except Integra the Hatchback of 1998 of the issue, remove a back seat (see the Head Kuzov). On the Hatchback of 1998 of the Issue. Integra models remove a spare wheel and a protective cover.

4a. Turn out bolts of fastening of a cover of access to the fuel tank to assembly of a gasoline pump (see silt.: Civic models).

4b. Fastening bolts – the Integra models.

5. Disconnect an electrical wiring from assembly. By means of two wrenches disconnect fuel lines (see an accompanying illustration).

6. Give nuts of fastening of the pump (see an accompanying illustration).

7. Carefully take assembly from the fuel tank (see an accompanying illustration).

8. Remove a protective cover of the main electric socket (see an accompanying illustration).

9. Disunite the main electric socket of assembly of the fuel pump (see an accompanying illustration).

10. Flat-nose pliers squeeze clips of fastening of a fuel hose – remove the top clip, lower shift to the middle of a hose, having completely released the pump union.
11. Disconnect the pump from a basic arm.

12. Remove from the lower end face of assembly the filtering element (see an accompanying illustration).

13. Installation is made upside-down. Do not forget to replace sealing laying of a landing flange of a cover of access to the fuel tank.