2.17. Check of level of liquid in automatic transmission

Automatic hydromechanical transmission. Stepless variator

Level of working liquid in automatic transmission is controlled at the engines and transmission which are warmed up up to the normal working temperature.

The required extent of warming up of units is provided with a car run on distance not less than 16 km.

 PERFORMANCE ORDER

1. Install the car on the flat horizontal platform and switch off the engine. In transmission check should be made for exact determination of level of working liquid not earlier than 60 and not later than 90 seconds after switching off of the engine.

2. Take out the control probe (the handle of yellow color) from a case of transmission and wipe it dry pure rags.

3. Insert the probe into an opening of a case of transmission and lower it against the stop, as shown in an illustration.
4. Again take out the probe and check the level of working liquid. Level of liquid has to be between the top and lower tag.
5. If the level of working liquid fell below the minimum tag, add liquid of the recommended brand and type in a transmission case and bring its level to the top tag.

Transmission with a stepless variator

Apply only working ATF PREMIUM liquid of the Honda brand to gas station and a dolivaniye. In urgent cases it is possible to use the working liquid of the II DEXRONR or III brand intended for automatic transmissions. However at the same time violation of normal functioning of transmission with a stepless variator is possible. At the first opportunity merge working liquid from transmission and replace it with the recommended Honda brand ATF PREMIUM liquid.

Automatic hydromechanical transmission

Operation of automatic transmission is allowed only on working ATF PREMIUM liquid of the Honda brand or on the worker, DEXRON® liquid of type II or III.

 PERFORMANCE ORDER

1. Insert the control probe into an opening of a case of transmission and advance it against the stop, as shown in an illustration.