5.16. Removal and installation of a receiver dehumidifier To / In

The air conditioning system constantly is under high pressure. Do not disconnect refrigerator lines at all and do not remove any components of system, previously without having executed a discharge of the last. The discharge of the air conditioning system has to be made by forces of the skilled expert in the conditions of a workshop of car service. At a rassoyedineniye of refrigerator lines surely put on goggles!

When replacing components of the air conditioning system the certain amount of replaceable refrigerator oil necessary for filling of volume of new knot will be required. Use only the oil good for the use in the R-134a systems (attentively study the label on a container).


 PERFORMANCE ORDER

1. Make air conditioning system discharge in the conditions of a specialized workshop.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!


3. Disconnect from a receiver refrigerator lines (see an accompanying illustration), at once to a zakuporta the open ends of tubes and unions in order to avoid hit in system of dirt.

4. Remove a loker of an arch of a wheel (see the Head Kuzov), release a coupling bolt of a basic arm (see an accompanying illustration) and remove a receiver dehumidifier from the car.

5. Installation is made upside-down. Do not forget to replace sealing rings of nipple connections.
6. Make system charging in the conditions of a specialized workshop.