5.18. Removal and installation of the K/V condenser

The air conditioning system constantly is under high pressure. Do not disconnect refrigerator lines at all and do not remove any components of system, previously without having executed a discharge of the last. The discharge of the air conditioning system has to be made by forces of the skilled expert in the conditions of a workshop of car service. At a rassoyedineniye of refrigerator lines surely put on goggles!


 PERFORMANCE ORDER

1. Make a discharge of the air conditioning system in the conditions of a specialized workshop.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!


3. Disconnect an electrical wiring from the sensor switch of pressure and the fan of an obduv of the К/В conditioner.

4. Turn out bolts and disconnect from the condenser the condensing and digit lines (see an accompanying illustration).

5. Remove condenser arms on the Integra models also remove the top arms of support of a radiator (see an illustration above).
6. Remove the condenser from the car.

On the Integra models it is necessary to incline a radiator for the purpose of providing the corresponding working space back. Try not to damage plates of heat exchangers of the condenser and a radiator.


7. Installation is made upside-down.

Sealing rings are subject to replacement without fail (before installation slightly oil new rings refrigerator).


8. Make system charging in the conditions of a specialized workshop.