Honda:: Civic:: Replacement of protective covers of the steering mechanism

12:16. Replacement of protective covers of the steering mechanism

PERFORMANCE ORDER

1. Weaken nuts of fastening of the corresponding wheel. A car front also establish to Poddomkratta it on props. Remove a wheel.
2. Remove from a bar of steering draft a tip and its lock-nut (see Removal and installation of tips of steering drafts).

3. Have a bite bokorezam and shoot bandage films of fastening of a rubber protective cover of the steering mechanism (see an accompanying illustration).

4. Before installation of a new cover wind the cut end of steering draft with an adhesive tape incidentally not to damage small sponges of a cover when landing it on draft.
5. Put on a new cover draft and pull it on a crater of the steering mechanism, having tracked correctness of landing of its sealing sponges in a reception flute. Fix a cover by new bandage tapes.
6. Remove an adhesive tape and screw on the place a tip of steering draft (see Removal and installation of tips of steering drafts).
7. Establish into place a wheel. Lower the car on the earth and tighten wheel nuts with the required effort (see Specifications to the Head Routine maintenance).