13:13. Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back

 PERFORMANCE ORDER

1. Open a door of a back and take plastic clamps of fastening of the panel internal upholsteries.

Latch

 PERFORMANCE ORDER

1a. Remove a decorative cover.

1b. Turn out screws of fastening of assembly of a latch (see accompanying illustrations).

2. Disconnect an executive rod, disunite electric sockets, then remove a latch.
3. Installation is made upside-down.

Lock cylinder

 PERFORMANCE ORDER

1. Turn out a bolt of fastening of the cylinder to a back door (see an accompanying illustration).

2. Disconnect an executive rod, deploy the cylinder and take it from the door panel.
3. Installation is made upside-down.

Emphasis

 PERFORMANCE ORDER

1. Open a door of a back and prop up it in the top situation.

2. Having hooked the small screw-driver, remove clamps of fastening of the top end of an emphasis. Having sharply pulled for an emphasis, disconnect it from the car (see an accompanying illustration).

3. Remove a decorative cover, give the lower fixing bolt (see an accompanying illustration) and remove an emphasis.

4. Installation is made upside-down.