1. Adjustment of provision of a cowl in an aperture of a motive compartment is made by shift in the relevant party of loopy levels after weakening of their fixture.
2. For determination of size of shift lead round levels of loops a marker.
3. Weaken fixture and shift loops in the required direction (carry out adjustment without hurrying, in stages, shifting levels of loops gradually for each approach). Again tighten bolts, lower a cowl and check correctness of an arrangement it in an aperture.
|
|
4. Updating of the provision (in the vertical and horizontal planes) assemblies of a latch of the lock of a cowl on a basic plate of a radiator can be in case of need executed – the cowl has to be closed densely and fall aflush with the surfaces of wings. For adjustment of the lock lead round heads of bolts of fastening of assembly of a latch a marker or a chertilka, then weaken bolts and displace a latch in the required direction (see an accompanying illustration). Upon completion of adjustment strongly tighten fixing bolts. |
|
|
5. In conclusion adjust the provision of rubber pillows of a cowl on the radiator support panel (see an accompanying illustration), trying to obtain that the cowl fell into a closed position aflush with wings. |
6. Assembly of a latch of the lock of a cowl has to periodically (along with loops – see Service of loops and locks of the car) to be greased with lubricant on a lithium basis in order to avoid jamming and bystry wear.
|
|