13:15. Removal and installation of a latch, cylinder of the lock and emphasis of a cover of the luggage compartment

Lock latch

 PERFORMANCE ORDER

1. Open a cover of the luggage compartment and lead round a marker a latch of its lock for the purpose of simplification of the procedure of installation it into place.

2. Give a bolt and a nut of fastening of a castle latch (see an accompanying illustration).

3. Remove a latch and disconnect a driving cable and an electrical wiring (see an accompanying illustration).

4. Installation is made upside-down.

Lock cylinder

 PERFORMANCE ORDER

1. Open a luggage carrier. Through a special opening in a cover also disconnect a driving cable from the lock cylinder.
2. Turn the lock cylinder on 90 ° counterclockwise for the purpose of combination of lock uvulas of a clamp with reciprocal grooves. Having pulled the cylinder on itself, take it from a cover of the luggage compartment.
3. Installation is made upside-down.

Cover emphasis

 PERFORMANCE ORDER

1. Lift a cover of the luggage compartment and reliably record it in open situation.
2. Having turned out two fixing bolts, отсо you edinit the top end of an emphasis.
3. Having hooked the small screw-driver, remove a decorative cover, then turn out a bolt of fastening of the lower end of an emphasis and remove the last from the car.
4. Installation is made upside-down.