Honda Civic - the Repair manual and operation
1. Introduction
2. Maintenance instruction
3. Routine maintenance
4. Engine
4.1. Repair of the engine without extraction from the car - the Civic model
4.2. Repair of the engine without extraction from the car - the Integra model
4.2.1. General information
4.2.2. Preparatory actions and the list of repair procedures which can be executed without extraction of the engine from the car
4.2.3. Reduction of the piston of the first cylinder in the provision of the top dead point (TDP)
4.2.4. Removal and installation of a cover of a head of cylinders
4.2.5. Removal and installation of the inlet pipeline
4.2.6. Removal and installation of a final collector
4.2.7. Removal, check of a state and installation of a gas-distributing belt and cogwheels of the GRM drive
4.2.8. Replacement of a forward epiploon of a bent shaft
4.2.9. The VTEC systems - the general information and check of a condition of components
4.2.10. Removal, check of a state and installation of camshafts and assembly of yokes
4.2.11. Replacement of valvate springs with plates and maslootrazhatelny caps
4.2.12. Removal and installation of a head of cylinders
4.2.13. Removal and installation of the pallet of a case of the engine
4.2.14. Removal, check of a state and installation of the oil pump
4.2.15. Replacement of a flywheel / driving disk
4.2.16. Replacement of a back epiploon of a bent shaft
4.2.17. Check of a state and replacement of support of a suspension bracket of the power unit
4.3. General and capital repairs of the engine
5. Cooling system and heating
6. Power supply system and release
7. Engine electric equipment
8. Control systems of the engine
9. Gear shifting box
10. Coupling and power shafts
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
4.2.15. Replacement of a flywheel / driving disk
See appropriate section
Removal and installation of a flywheel / driving disk
.